.png){kind=small}
A jacket along almost the whole length
The cutaway shows the jacket around the tank: it covers 80% of its length. The collectors' antifreeze flows through it and heats the water.
1 / 4
Solar water heater cylinder, triple energy
Mastersol ECO Glass solar water heater cylinder 160lt, triple energyCode: MSGb160T
To replace the cylinder of an old solar water heater: closed circuit, with Duro Glass enamel. From 100 to 300 litres.
Mastersol ECO Glass boiler triple energy models
- Delivery across GreeceBy freight because of its weight (55 kg). The cost is shown at checkout, once you enter an address.
- Pick-up in Patras171 Ag. Ioanni Pratsika St · Mon–Fri 08:30–17:00, Sat 09:00–14:00
- Installation by a partnerPartner installers across Greece.
- 5 years (10 with the extension kit) warranty from ClimaventisSpare parts and service directly from us.
Installer or retailer? Log in for trade prices
Description
A new cylinder for your solar water heater.
The Mastersol MSGb…T: it is a closed-circuit solar water heater cylinder, to replace the cylinder of an old solar water heater. According to the manufacturer it fits most solar water heaters on the market; ask us about yours. It is triple energy: it is heated by the solar collectors through the jacket, by its built-in 3.5 kW electric heating element, and by the central heating boiler.
The Bayer Duro Glass enamel is black, fired at 850 °C to DIN 4753-3 and safe for public health (DIN 51032, EN 1388-2). Every cylinder is pressure tested at 15 bar. Being closed circuit and running on antifreeze, it withstands down to −47 °C. The jacket covers 80% of its length.
The tank is 2.5 mm European 1204 V.E. steel, MAG welded, with 5 cm rigid polyurethane insulation, heavy-duty brass connections and a magnesium anode (EN 12438). The outer casing is pre-painted galvanised sheet, 0.5 mm, or magnetic stainless steel.
Triple energySolar, electricity and boiler.
Duro Glass enamelBy Bayer, fired at 850 °C.
Tested at 15 barEvery Mastersol cylinder is pressure tested at 15 bar.
Withstands −47 °CClosed circuit with antifreeze.
3.5 kW heating elementIncluded, Φ140, 8 holes.
For an old solar heaterFits most on the market.
Highlights
A closer look.
From the manufacturer's photos.
On the solar heater's stand
The cylinder takes the place of the old one, above the collectors. The dimensions of each size are in the comparison.
Connections and label
On the side, the connections to the collectors and the cylinder's label with the CE mark.
Compare the models
Five sizes, one design.
All are closed circuit, with Duro Glass enamel, a jacket over 80% of the length and a 3.5 kW electric heating element.
| Compare the models | MSGb100T395.20 € | MSGb120T422.24 € | MSGb160T443.04 €This model | MSGb200T491.92 € | MSGb300T707.20 € |
|---|---|---|---|---|---|
| Tank capacity | 100lt | 120lt | 160lt | 200lt | 300lt |
| Tank length | – | 106.5 cm | 128.5 cm | 128.5 cm | 178 cm |
| Tank diameter | – | 50 cm | 50 cm | 58 cm | 58 cm |
| Net weight | – | 45 kg | 55 kg | 69 kg | 100 kg |
| Jacket capacity | – | 6lt | 8lt | 9lt | 19lt |
| Maximum jacket working pressure | – | 3.2 bar | 3.2 bar | 3.2 bar | 3.2 bar |
| Maximum working pressure | – | 10 bar | 10 bar | 10 bar | – |
| Maximum test pressure | – | 15 bar | 15 bar | 15 bar | 15 bar |
| Electric heating element | – | 3.5kW, Φ140, 8 holes | 3.5kW, Φ140, 8 holes | 3.5kW, Φ140, 8 holes | 3.5kW, Φ140, 8 holes |
| Tank insulation | Polyurethane 6cm, 42kg/m³ | Rigid polyurethane 5cm, 48kg/m³ | Rigid polyurethane 5cm, 48kg/m³ | Rigid polyurethane 5cm, 48kg/m³ | Rigid polyurethane 5cm, 48kg/m³ |
| Inner tank lining | Double Duro Glass enamel (Bayer) to DIN 4753, fired at 830 °C | Duro Glass liquid enamel | Duro Glass liquid enamel | Duro Glass liquid enamel | Duro Glass liquid enamel |
Manufacturer's data. "From" prices include VAT.
Technical specifications
All the numbers, in one table.
| Solar Water Heaters | |
|---|---|
| Inner tank lining | Duro Glass liquid enamel (Bayer) to DIN 4753-3, fired at 850 °C (DIN 51032, EN 1388-2) |
| Maximum test pressure | 15 bar |
| Maximum working pressure | 10 bar |
| Outer casing | Pre-painted galvanised sheet 0.5mm or magnetic stainless steel |
| Tank capacity | 160lt |
| Tank connections | Heavy-duty brass |
| Tank diameter | 50 cm |
| Tank insulation | Rigid polyurethane 5cm, 48kg/m³ (DIN 53420), self-extinguishing (DIN 4102) |
| Tank steel | 2.5mm European 1204 V.E. steel, MAG welded |
| Tank type | Closed circuit |
| Tank length | 128.5 cm |
| Jacket capacity | 8lt |
| Electric heating element | 3.5kW, Φ140, 8 holes |
| Maximum operating temperature | 95 °C |
| Maximum jacket working pressure | 3.2 bar |
| Heating | |
| Net weight | 55 kg |
| Warranty | 5 years (10 with the extension kit) |
| Ranges | |
| Litres | 120 lt (2-3 users) |
| Special Features | Wi-Fi ready |
Warranty & installation
We are here after you buy.
5 yearson the cylinder
10 yearson the cylinder, with the warranty extension kit
Ask us for the warranty terms and the extension kit.
Warranty form (PDF, in Greek) →By a partner in your area
A partner installer does the site visit, the connection and the first start-up. Ask for a quote together with the product.
Contact us →Sure about the size?
Our engineers calculate your home's heat loss and confirm the choice. The first assessment is free.
Contact us →Before installing
- Does it fit your solar heater?According to the manufacturer it fits most solar water heaters on the market. Send us the make, litres and dimensions of the old cylinder and we will tell you.
- Closed circuitThe jacket is filled with antifreeze. Maximum jacket working pressure 3.2 bar, test pressure 5 bar (EN 12976-1).
- Domestic waterMaximum working pressure 10 bar, test pressure 15 bar, maximum temperature 95 °C.
Questions
Ask us before you buy.
Our technicians answer every question, from choosing to installing.
2610 334 389 info@climaventis.grWill it fit my old solar water heater?
According to the manufacturer it fits most solar water heaters on the market. Send us the make, litres and dimensions of the old cylinder and we will tell you.
What does closed circuit mean?
That the domestic water does not pass through the collectors. Antifreeze flows through the collectors and the jacket, which is why the cylinder withstands down to −47 °C.
Is the electric heating element included?
Yes, a 3.5 kW element, Φ140 with 8 holes.
Double or triple energy?
The double-energy cylinder is heated by the sun and by electricity. The triple-energy one also connects to the central heating boiler.
Is there WiFi?
As a product option there is a WiFi module for remote control of the solar water heater.
What warranty does it have?
5 years, or 10 years with the warranty extension kit. Ask us for the terms.
How is it delivered?
Collect it from our shop in Patras, or we send it by carrier. The shipping cost shows in the cart; if it does not show for your area or size, call us for the delivery cost. A plumber installs it; we can suggest a partner in your area.
Complete the installation
For your solar water heater.
An expansion vessel for the closed circuit and Mastersol selective collectors, if you also want to replace the collectors.
Mastersol
Mastersol FS1 expansion vessel for a solar closed circuit - 1 litre
Fits your power need
23.73 €
Related products
See also
Mastersol
Mastersol ECO Glass solar water heater cylinder 100lt, triple energy
Fits your power need
395.20 €
Options
Mastersol
Mastersol ECO Glass solar water heater cylinder 120lt, triple energy
Fits your power need
422.24 €
Options
Mastersol
Mastersol ECO Glass solar water heater cylinder 200lt, triple energy
Fits your power need
491.92 €
Options
Mastersol
Mastersol ECO Glass solar water heater cylinder 300lt, triple energy
Fits your power need
707.20 €
Options
