.png){kind=small}
No coil
The manufacturer's drawing shows the clear inside of the tank and the insulation around it.
Hot water cylinder without a heat exchanger
Hot water cylinder 200 litresCode: BL0200
A vertical cylinder with Direct Glass enamel and no coil. From 200 to 1,000 litres.
Mastersol BL0 models
- Delivery across GreeceBy freight because of its weight (70 kg). The cost is shown at checkout, once you enter an address.
- Pick-up in Patras171 Ag. Ioanni Pratsika St · Mon–Fri 08:30–17:00, Sat 09:00–14:00
- Installation by a partnerPartner installers across Greece.
Installer or retailer? Log in for trade prices
Description
Hot water storage, without a heat exchanger.
The Mastersol BL0 is a vertical hot water cylinder without a heat exchanger. It has no coil; it takes a 4 kW electric heating element, on request.
Inside, it is protected from corrosion by Direct Glass liquid enamel, fired at 850 °C, 400 microns thick, made of inorganic silicates without chemical additives (DIN 4753 Teil 3 & 6). The glass bonds fully to the steel and follows its expansion and contraction. It is built to DIN 4753 and EN 12897.
It stands upright and has ports for recirculation and for an immersion thermometer, a cleaning flange and a magnesium anode. The insulation is polyurethane; its thickness for each size is in the comparison. The outer jacket is soft PVC, in a colour of your choice. It is meant for homes and businesses, from 200 to 1,000 litres.
No heat exchanger4 kW electric heating element, on request.
Direct Glass enamelFired at 850 °C, 400 microns thick, to DIN 4753.
Polyurethane insulationSoft PVC jacket, in a colour of your choice.
Cleaning flangeFor inspecting and cleaning the tank.
CE and ISO 9001CE marked; Mastersol has an ISO 9001 quality management system.
Highlights
A closer look.
From the manufacturer's photos.
Compare the models
Four sizes, one design.
All have Direct Glass enamel, a magnesium anode, a cleaning flange and a 10 bar working pressure.
| Compare the models | BL0200503.58 €This model | BL0500854.21 € | BL07501,434.23 € | BL010001,635.68 € |
|---|---|---|---|---|
| Tank capacity | 200lt | 500lt | 750lt | 1000lt |
| Tank height | 1200 mm | 1700 mm | 1800 mm | 2000 mm |
| Tank diameter | 600 mm | 750 mm | 1000 mm | – |
| Diameter without insulation | 500 mm | – | – | – |
| Required height | – | – | 2059.1 mm | – |
| Net weight | 70 kg | 141 kg | 228 kg | 243 kg |
| Maximum working pressure | 10 bar | 10 bar | 10 bar | 10 bar |
| Maximum test pressure | 15 bar | 15 bar | 15 bar | – |
| Tank insulation | 50mm soft removable polyurethane | 55mm polyurethane, 52 kg/m³ | 100mm soft removable polyurethane | 100mm soft removable polyurethane |
| Tank steel | 3mm USD37,2 steel sheet | 2.5mm USD37,2 steel sheet | 4mm USD37,2 steel sheet | 4mm USD37,2 steel sheet |
Manufacturer's data. The diameter includes the insulation. "From" prices include VAT.
Technical specifications
All the numbers, in one table.
| Solar Water Heaters | |
|---|---|
| Inner tank lining | Direct Glass liquid enamel (Bayer), fired at 850 °C |
| Maximum test pressure | 15 bar |
| Maximum working pressure | 10 bar |
| Outer casing | Soft PVC, in a colour of your choice |
| Tank capacity | 200lt |
| Tank diameter | 600 mm |
| Tank height | 1200 mm |
| Tank insulation | 50mm soft removable polyurethane |
| Tank steel | 3mm USD37,2 steel sheet |
| Heat exchangers | None |
| Diameter without insulation | 500 mm |
| Electric heating element | 4 kW, on request |
| Maximum operating temperature | 95 °C |
| Heating | |
| Net weight | 70 kg |
Warranty & installation
We are here after you buy.
7 yearsmanufacturer's warranty
According to the manufacturer's instructions, the warranty requires installation as shown in the diagrams, water within drinking water limits and regular checks of the anode. The magnesium anode is a consumable and is not covered.
Warranty form (PDF, in Greek) →By a partner in your area
A partner installer does the site visit, the connection and the first start-up. Ask for a quote together with the product.
Contact us →Sure about the size?
Our engineers calculate your home's heat loss and confirm the choice. The first assessment is free.
Contact us →Before installing
- RoomIn a closed room protected from frost, with a floor drain for any leaks, as the manufacturer's instructions require.
- DimensionsDimensions: height 1200 mm.
- WeightTank weight 70 kg. Allow for the water it will hold when you choose where it goes.
- Pressure and safetyMaximum working pressure 10 bar. A safety valve is mandatory, according to the manufacturer's instructions.
- WaterThe mains water must be within drinking water limits; otherwise, according to the manufacturer, the cylinder is no longer under warranty.
- ServiceThe magnesium anode is checked at least twice a year and replaced when it is used up. In suitable water it lasts about 2 years, but it may need replacing after 6 months. Cleaning is done through the flange, without chemicals.
Questions
Ask us before you buy.
Our technicians answer every question, from choosing to installing.
2610 334 389 info@climaventis.grHow is a cylinder without a heat exchanger heated?
It has no coil for a boiler or a solar system. It takes a 4 kW electric heating element, on request. For how it fits into your own installation, ask your plumber or us.
Is the electric heating element included?
The 4 kW electric heating element is optional and fitted on request. You will find it in the product options.
Will it fit in my room?
The comparison shows the dimensions of each size.
Which size do I need?
It depends on how much hot water you use. Call us and we will work it out together.
What servicing does it need?
The magnesium anode is checked at least twice a year and replaced when it is used up. In suitable water it lasts about 2 years, but it may need replacing after 6 months. Cleaning is done through the flange, without chemicals.
What warranty does it have?
7 years, according to the manufacturer. It requires installation following the manufacturer's instructions, water within drinking water limits and regular checks of the magnesium anode, which is a consumable and is not covered.
How is it delivered?
Collect it from our shop in Patras, or we send it by carrier. The shipping cost shows in the cart; if it does not show for your area or size, call us for the delivery cost. A plumber installs it; we can suggest a partner in your area.
Related products
