EL · EN 0
Warranty 2 years Werstahl FP12 - Pellet fireplace insert 12kw 1 / 12
Werstahl All Werstahl →
Pellet fireplace insert

Werstahl FP12Code: FP12

It goes into an existing fireplace, is built into a wall or clad with plasterboard. From 3.5 to 12 kW, with a 15 kg pellet hopper.

Maximum output
12kW
Efficiency
82%
Autonomy
8-
Fuel silo capacity
15kg
Fuels
Pellets
For spaces of up to 360 m³
1,488.00 €incl. VAT
In stock · delivery or pick-up in Patras
Request a quote with installation
  • Delivery across GreeceBy freight because of its weight (125kg). The cost is shown at checkout, once you enter an address.
  • Pick-up in Patras171 Ag. Ioanni Pratsika St · Mon–Fri 08:30–17:00, Sat 09:00–14:00
  • Installation by a partnerPartner installers across Greece.
  • 2 years warranty from ClimaventisSpare parts and service directly from us.

Installer or retailer? Log in for trade prices

Description

Pellets in your fireplace.

The Werstahl FP12 is a 12 kW pellet cassette, an insert that goes into a classic fireplace. It can also be built into a wall or clad with plasterboard, and it burns pellets from its built-in 15 kg hopper.

Its output ranges from 3.5 to 12 kW, with a consumption of 0.8 to 2.0 kg of pellets per hour and an efficiency of 82%. It heats a room volume of up to 360 cubic metres, as an indication, and a full hopper lasts 8 to 19 hours.

The control panel, with a digital display, sits on the right side of the front. The photos show that the insert stands on telescopic rails and slides forward.

3.5 to 12 kW82% efficiency.
15 kg hopper8 to 19 hours of autonomy.
Pellets0.8 to 2.0 kg per hour.
Three ways to fit itIn a fireplace, built in or clad with plasterboard.
Digital panelOn the right side of the front.
Up to 360 m³Room volume, as an indication.
Highlights

A closer look.

From the product photos.

For your fireplace

For your fireplace

At 80 × 64 × 60 cm (W × H × D), the insert goes into a classic fireplace, is built into a wall or clad with plasterboard.

Telescopic rails

Telescopic rails

The insert stands on telescopic rails and slides forward, as in the photo. Ask us how it would fit in your fireplace.

Control panel

Control panel

Next to the glass, on the right side of the front: the panel with its digital display and control buttons.

Pellet burner

Pellet burner

The pellets burn in the burner pot behind the glass. Consumption is 0.8 to 2.0 kg per hour, depending on the output.

Technical specifications

All the numbers, in one table.

Heating
Autonomy8 - 19 hours
Consumption0.8 - 2.0kg/h
Dimensions (W x H x D) cm80 x 64 x 60cm
Efficiency82%
Electrical230V / 50Hz
Flue diameter80mm
FuelPellets
Fuel silo capacity15kg
Heated spaceup to 360 m³ (room volume)
Maximum output12kw
Minimum output3.5kw
Net weight125kg
Warranty2 years
Ranges
Nominal Power (kw)12kw
Warranty & installation

We are here after you buy.

Installation

By a partner in your area

A partner installer does the site visit, the connection and the first start-up. Ask for a quote together with the product.

Contact us →
Heating study

Sure about the size?

Our engineers calculate your home's heat loss and confirm the choice. The first assessment is free.

Contact us →

Before installing

  • PlacementInside a classic fireplace, built into a wall or clad with plasterboard.
  • Flue and airFlue outlet 80mm, combustion air inlet 40 mm.
  • Power supplySupply 230V / 50Hz.
  • SpaceDimensions 80 x 64 x 60cm (W × H × D), weight 125kg.
  • SizeHeated space up to 360 m³ (room volume), indicative: it depends on the insulation and the climate.
Questions

Ask us before you buy.

Our technicians answer every question, from choosing to installing.

2610 334 389 info@climaventis.gr
Where does it go?

Inside a classic fireplace, built into a wall or clad with plasterboard. It measures 80 × 64 × 60 cm (W × H × D); send us the dimensions of your fireplace and we will look at it together.

How much space does it heat?

According to the product data, a room volume of up to 360 cubic metres, as an indication. The real coverage depends on the insulation and the climate.

How long does a full hopper last?

The hopper holds 15 kg of pellets. Autonomy is 8 to 19 hours and consumption 0.8 to 2.0 kg per hour, depending on the output you ask for.

What does installation need?

An 80 mm flue, a 40 mm combustion air inlet and a 230 V / 50 Hz supply. A technician installs it; we can suggest a partner in your area.

What warranty does it have?

2 years on all parts of the insert. Ask us about the warranty terms.

How is it delivered?

The insert ships by carrier throughout Greece, with the cost shown in the cart, or you collect it from our shop in Patras.

Related products

See also