.png){kind=small}
Two removable stainless steel heat exchangers
The two coils of 1″ stainless steel pipe enter the tank through side flanges, one above the other.
1 / 7
Stainless steel hot water cylinder, triple energy
Stainless steel hot water cylinder 7,000 litres, triple energyCode: BLVi27000
Inox 316L, with two removable heat exchangers of stainless steel pipe. From 2,000 to 9,000 litres.
Mastersol BLVi2 models
- Delivery across GreeceBy freight because of its weight (1920 kg). The cost is shown at checkout, once you enter an address.
- Pick-up in Patras171 Ag. Ioanni Pratsika St · Mon–Fri 08:30–17:00, Sat 09:00–14:00
- Installation by a partnerPartner installers across Greece.
Installer or retailer? Log in for trade prices
Description
Stainless steel, for two heat sources.
The Mastersol BLVi2 is a vertical hot water cylinder with two removable heat exchangers of 1″ stainless steel pipe. It is triple energy: the two heat exchangers connect to two heat sources, for example a boiler and solar collectors, and it also takes a 4 kW electric heating element, on request.
It is made entirely of stainless steel, inox 316L. The coils are made of 1″ stainless steel pipe. It also has a magnesium anode.
It stands upright and has ports for recirculation and for an immersion thermometer, a cleaning flange and a magnesium anode. The insulation is removable soft polyurethane, 100 mm thick, with a soft PVC jacket. It is meant for homes and businesses, from 2,000 to 9,000 litres.
Inox 316LA tank made entirely of stainless steel.
Two removable heat exchangersFor two heat sources, e.g. a boiler and solar.
100 mm insulationSoft polyurethane, removable.
Cleaning flangeFor inspecting and cleaning the tank.
CE and ISO 9001CE marked; Mastersol has an ISO 9001 quality management system.
Highlights
A closer look.
From the manufacturer's photos and drawings.
Soft PVC jacket
The 100 mm soft polyurethane insulation is covered with a soft PVC jacket.
Compare the models
Six sizes, one design.
All are made of inox 316L, with 100 mm soft polyurethane insulation and a 10 bar working pressure.
| Compare the models | BLVi220008,851.50 € | BLVi2300010,919.87 € | BLVi2400015,330.00 € | BLVi2500016,327.49 € | BLVi2700025,619.45 €This model | BLVi2900029,200.00 € |
|---|---|---|---|---|---|---|
| Tank capacity | 2000lt | 3000lt | 4000lt | 5000lt | 7000lt | 9000lt |
| Heat exchanger surface | – | 2 × 3.2 m² | 2 × 5.4 m² | 2 × 5.4 m² | 2 × 7.8 m² | 2 × 7.8 m² |
| Tank height | – | 2500 mm | 2650 mm | 2750 mm | 3200 mm | – |
| Tank diameter | – | 1500 mm | 1700 mm | 1800 mm | – | 2200 mm |
| Diameter without insulation | – | 1300 mm | 1500 mm | 1600 mm | 1800 mm | – |
| Required height | – | 2915.4 mm | 3148.4 mm | 3286.7 mm | – | – |
| Net weight | – | 835 kg | 1107 kg | 1193 kg | 1920 kg | 2319 kg |
| Maximum working pressure | – | 10 bar | 10 bar | 10 bar | 10 bar | 10 bar |
| Maximum test pressure | – | – | 15 bar | 15 bar | 15 bar | 15 bar |
| Maximum heat exchanger pressure | – | 25 bar | 25 bar | 25 bar | 25 bar | 25 bar |
Manufacturer's data. The diameter includes the insulation. "From" prices include VAT.
Technical specifications
All the numbers, in one table.
| Solar Water Heaters | |
|---|---|
| Heat exchanger surface | 2 × 7.8 m² |
| Inner tank lining | Stainless steel, inox 316L |
| Maximum heat exchanger pressure | 25 bar |
| Maximum test pressure | 15 bar |
| Maximum working pressure | 10 bar |
| Outer casing | Soft PVC, in a colour of your choice |
| Tank capacity | 7000lt |
| Tank height | 3200 mm |
| Tank insulation | 100mm soft removable polyurethane |
| Heat exchangers | 2, removable, inox |
| Diameter without insulation | 1800 mm |
| Electric heating element | 4 kW, on request |
| Maximum operating temperature | 95 °C |
| Heating | |
| Net weight | 1920 kg |
Warranty & installation
We are here after you buy.
7 yearsmanufacturer's warranty
According to the manufacturer's instructions, the warranty requires installation as shown in the diagrams, water within drinking water limits and regular checks of the anode. The magnesium anode is a consumable and is not covered.
Warranty form (PDF, in Greek) →By a partner in your area
A partner installer does the site visit, the connection and the first start-up. Ask for a quote together with the product.
Contact us →Sure about the size?
Our engineers calculate your home's heat loss and confirm the choice. The first assessment is free.
Contact us →Before installing
- RoomIn a closed room protected from frost, with a floor drain for any leaks, as the manufacturer's instructions require.
- DimensionsThe height and diameter of each size are in the model comparison.
- Pressure and safetyA safety valve is mandatory, according to the manufacturer's instructions. The maximum working pressure of each size is in the comparison.
- WaterThe mains water must be within drinking water limits; otherwise, according to the manufacturer, the cylinder is no longer under warranty.
- ServiceThe magnesium anode is checked at least twice a year and replaced when it is used up. In suitable water it lasts about 2 years, but it may need replacing after 6 months. Cleaning is done through the flange, without chemicals.
Questions
Ask us before you buy.
Our technicians answer every question, from choosing to installing.
2610 334 389 info@climaventis.grWhat does "triple energy" mean?
That the water is heated in three ways: by two heat exchangers, connected to two heat sources such as a boiler and solar collectors, and by a 4 kW electric heating element, fitted on request.
Is the electric heating element included?
The 4 kW electric heating element is optional and fitted on request. You will find it in the product options.
Will it fit in my room?
The comparison shows the dimensions of each size. The soft polyurethane insulation is removable; the comparison also shows the diameter without it.
Which size do I need?
It depends on how much hot water you use and on the heat source. The comparison also shows the heat exchanger surface of each size. Call us and we will work it out together.
What servicing does it need?
The magnesium anode is checked at least twice a year and replaced when it is used up. In suitable water it lasts about 2 years, but it may need replacing after 6 months. Cleaning is done through the flange, without chemicals.
Is it available with a larger heat exchanger or a metal casing?
Yes. According to the manufacturer it is also available with larger heat exchangers, with a heating surface of 5.4 m², and with a metal outer casing. Ask us for the price and delivery time.
What warranty does it have?
7 years, according to the manufacturer. It requires installation following the manufacturer's instructions, water within drinking water limits and regular checks of the magnesium anode, which is a consumable and is not covered.
How is it delivered?
Collect it from our shop in Patras, or we send it by carrier. The shipping cost shows in the cart; if it does not show for your area or size, call us for the delivery cost. A plumber installs it; we can suggest a partner in your area.
Related products
See also
Mastersol
Stainless steel hot water cylinder 2,000 litres, triple energy (2 removable stainless steel heat exchangers)
Fits your power need
8,851.50 €
Mastersol
Stainless steel hot water cylinder 3,000 litres, triple energy (2 removable stainless steel heat exchangers)
Fits your power need
10,919.87 €
Mastersol
Stainless steel hot water cylinder 4,000 litres, triple energy (2 removable stainless steel heat exchangers)
Fits your power need
15,330.00 €
Mastersol
Stainless steel hot water cylinder 5,000 litres, triple energy (2 removable stainless steel heat exchangers)
Fits your power need
16,327.49 €
