.png){kind=small}
No heat exchanger
The inside of the tank is clear. The side flanges are for inspecting and cleaning it.
1 / 6
Stainless steel hot water cylinder
Stainless steel hot water cylinder 3,000 litresCode: BLVi03000
A tank made entirely of inox 316L, without a heat exchanger. From 1,500 to 9,000 litres.
Mastersol BLVi0 models
- Delivery across GreeceBy freight because of its weight (755 kg). The cost is shown at checkout, once you enter an address.
- Pick-up in Patras171 Ag. Ioanni Pratsika St · Mon–Fri 08:30–17:00, Sat 09:00–14:00
- Installation by a partnerPartner installers across Greece.
Installer or retailer? Log in for trade prices
Description
Stainless steel, for large volumes of water.
The Mastersol BLVi0 is a vertical hot water cylinder without a heat exchanger. It has no coil; it takes a 4 kW electric heating element, on request.
It is made entirely of stainless steel, inox 316L. It also has a magnesium anode.
It stands upright and has ports for recirculation and for an immersion thermometer, a cleaning flange and a magnesium anode. The insulation is removable soft polyurethane, 100 mm thick, with a soft PVC jacket. It is meant for homes and businesses, from 1,500 to 9,000 litres.
Inox 316LA tank made entirely of stainless steel.
No heat exchanger4 kW electric heating element, on request.
100 mm insulationSoft polyurethane, removable.
Cleaning flangeFor inspecting and cleaning the tank.
CE and ISO 9001CE marked; Mastersol has an ISO 9001 quality management system.
Highlights
A closer look.
From the manufacturer's photos and drawings.
Soft PVC jacket
The 100 mm soft polyurethane insulation is covered with a soft PVC jacket.
Compare the models
Seven sizes, one design.
All are made of inox 316L, with 100 mm soft polyurethane insulation and a 10 bar working pressure.
| Compare the models | BLVi015002,323.24 € | BLVi020002,832.82 € | BLVi030004,365.58 €This model | BLVi040006,642.66 € | BLVi050007,942.70 € | BLVi070009,708.18 € | BLVi0900013,435.42 € |
|---|---|---|---|---|---|---|---|
| Tank capacity | 1500lt | 2000lt | 3000lt | 4000lt | 5000lt | 7000lt | 9000lt |
| Tank height | 2000 mm | 2000 mm | 2500 mm | 2650 mm | 2750 mm | 3200 mm | 3300 mm |
| Tank diameter | 1300 mm | 1400 mm | 1500 mm | 1700 mm | 1800 mm | 2000 mm | 2200 mm |
| Diameter without insulation | 1100 mm | 1200 mm | 1300 mm | 1500 mm | 1600 mm | 1800 mm | 2000 mm |
| Required height | 2385.3 mm | 2441.3 mm | 2915.4 mm | 3148.4 mm | 3286.7 mm | 3773.6 mm | 3966.1 mm |
| Net weight | 516 kg | 600 kg | 755 kg | 1027 kg | 1103 kg | 1850 kg | 2239 kg |
| Maximum working pressure | 10 bar | 10 bar | 10 bar | 10 bar | 10 bar | 10 bar | 10 bar |
| Maximum test pressure | 15 bar | 15 bar | 15 bar | 15 bar | 15 bar | 15 bar | 15 bar |
| Maximum heat exchanger pressure | 25 bar | 25 bar | 25 bar | 25 bar | 25 bar | 25 bar | 25 bar |
Manufacturer's data. The diameter includes the insulation. "From" prices include VAT.
Technical specifications
All the numbers, in one table.
| Solar Water Heaters | |
|---|---|
| Inner tank lining | Stainless steel, inox 316L |
| Maximum heat exchanger pressure | 25 bar |
| Maximum test pressure | 15 bar |
| Maximum working pressure | 10 bar |
| Outer casing | Soft PVC |
| Tank capacity | 3000lt |
| Tank diameter | 1500 mm |
| Tank height | 2500 mm |
| Tank insulation | 100mm soft removable polyurethane |
| Heat exchangers | None |
| Required height | 2915.4 mm |
| Diameter without insulation | 1300 mm |
| Electric heating element | 4 kW, on request |
| Maximum operating temperature | 95 °C |
| Heating | |
| Net weight | 755 kg |
Warranty & installation
We are here after you buy.
7 yearsmanufacturer's warranty
According to the manufacturer's instructions, the warranty requires installation as shown in the diagrams, water within drinking water limits and regular checks of the anode. The magnesium anode is a consumable and is not covered.
Warranty form (PDF, in Greek) →By a partner in your area
A partner installer does the site visit, the connection and the first start-up. Ask for a quote together with the product.
Contact us →Sure about the size?
Our engineers calculate your home's heat loss and confirm the choice. The first assessment is free.
Contact us →Before installing
- RoomIn a closed room protected from frost, with a floor drain for any leaks, as the manufacturer's instructions require.
- DimensionsDimensions: height 2500 mm, diameter with insulation 1500 mm. Required room height 2915.4 mm: the diagonal of the tank, so it can be stood upright. The insulation is removable; without it, the diameter is 1300 mm.
- WeightTank weight 755 kg. Allow for the water it will hold when you choose where it goes.
- Pressure and safetyMaximum working pressure 10 bar. A safety valve is mandatory, according to the manufacturer's instructions.
- WaterThe mains water must be within drinking water limits; otherwise, according to the manufacturer, the cylinder is no longer under warranty.
- ServiceThe magnesium anode is checked at least twice a year and replaced when it is used up. In suitable water it lasts about 2 years, but it may need replacing after 6 months. Cleaning is done through the flange, without chemicals.
Questions
Ask us before you buy.
Our technicians answer every question, from choosing to installing.
2610 334 389 info@climaventis.grHow is a cylinder without a heat exchanger heated?
It has no coil for a boiler or a solar system. It takes a 4 kW electric heating element, on request. For how it fits into your own installation, ask your plumber or us.
Is the electric heating element included?
The 4 kW electric heating element is optional and fitted on request. You will find it in the product options.
Will it fit in my room?
The comparison shows the dimensions of each size. The manufacturer also gives the required room height: the diagonal of the tank, needed to stand it upright in place. The soft polyurethane insulation is removable; the comparison also shows the diameter without it.
Which size do I need?
It depends on how much hot water you use. Call us and we will work it out together.
What servicing does it need?
The magnesium anode is checked at least twice a year and replaced when it is used up. In suitable water it lasts about 2 years, but it may need replacing after 6 months. Cleaning is done through the flange, without chemicals.
What warranty does it have?
7 years, according to the manufacturer. It requires installation following the manufacturer's instructions, water within drinking water limits and regular checks of the magnesium anode, which is a consumable and is not covered.
How is it delivered?
Collect it from our shop in Patras, or we send it by carrier. The shipping cost shows in the cart; if it does not show for your area or size, call us for the delivery cost. A plumber installs it; we can suggest a partner in your area.
Related products
See also
Mastersol
Stainless steel hot water cylinder 1,500 litres (no heat exchanger)
Fits your power need
2,323.24 €
Mastersol
Stainless steel hot water cylinder 2,000 litres (no heat exchanger)
Fits your power need
2,832.82 €
Mastersol
Stainless steel hot water cylinder 4,000 litres (no heat exchanger)
Fits your power need
6,642.66 €
Mastersol
Stainless steel hot water cylinder 5,000 litres (no heat exchanger)
Fits your power need
7,942.70 €
