.png){kind=small}
One removable heat exchanger
The coil runs along the bottom of the tank, over almost its whole length, and enters through a flange at one end.
Horizontal stainless steel hot water cylinder, double energy
Horizontal stainless steel hot water cylinder 3,000 litres, double energyCode: BLHi13000
A horizontal tank in inox 316L, with one removable heat exchanger. From 1,500 to 7,000 litres.
Mastersol BLHi1 models
- Delivery across GreeceBy freight because of its weight (1065 kg). The cost is shown at checkout, once you enter an address.
- Pick-up in Patras171 Ag. Ioanni Pratsika St · Mon–Fri 08:30–17:00, Sat 09:00–14:00
- Installation by a partnerPartner installers across Greece.
Installer or retailer? Log in for trade prices
Description
Horizontal, for large volumes of water.
The Mastersol BLHi1 is a horizontal hot water cylinder with one removable heat exchanger of 1″ stainless steel pipe. It is double energy: the water is heated by the heat exchanger, connected for example to the central heating boiler, and by a 4 kW electric heating element, on request.
It is made entirely of stainless steel, inox 316L. The coils are made of 1″ stainless steel pipe. It also has a magnesium anode.
It is installed horizontally and has ports for recirculation and for an immersion thermometer, a cleaning flange and a magnesium anode. The insulation is removable soft polyurethane, 100 mm thick, with a soft PVC jacket. It is meant for homes and businesses, from 1,500 to 7,000 litres.
Inox 316LA tank made entirely of stainless steel.
Removable heat exchangerA coil of 1″ stainless steel pipe on a flange.
100 mm insulationSoft polyurethane, removable.
Cleaning flangeFor inspecting and cleaning the tank.
CE and ISO 9001CE marked; Mastersol has an ISO 9001 quality management system.
Highlights
A closer look.
From the manufacturer's drawings.
Compare the models
Five sizes, one design.
All are installed horizontally, with 100 mm soft polyurethane insulation and a 10 bar working pressure.
| Compare the models | BLHi115005,030.93 € | BLHi120006,322.20 € | BLHi130007,630.24 €This model | BLHi1500014,203.98 € | BLHi1700015,327.55 € |
|---|---|---|---|---|---|
| Tank capacity | 1500lt | 2000lt | 3000lt | 5000lt | 7000lt |
| Heat exchanger surface | 3.2 m² | 3.2 m² | 5.4 m² | 5.4 m² | 5.4 m² |
| Tank length | 2150 mm | 2150 mm | 2700 mm | 2700 mm | 3280 mm |
| Tank height | 1500 mm | 1600 mm | 1700 mm | 2000 mm | 2200 mm |
| Tank diameter | 1300 mm | 1400 mm | 1500 mm | 1800 mm | 2000 mm |
| Net weight | 572 kg | 650 kg | 1065 kg | 1307 kg | 1720 kg |
| Maximum working pressure | 10 bar | 10 bar | 10 bar | – | 10 bar |
| Maximum test pressure | 15 bar | 15 bar | 15 bar | 15 bar | 15 bar |
| Maximum heat exchanger pressure | 25 bar | 25 bar | 25 bar | 25 bar | 25 bar |
Manufacturer's data. The diameter includes the insulation. "From" prices include VAT.
Technical specifications
All the numbers, in one table.
| Solar Water Heaters | |
|---|---|
| Heat exchanger surface | 5.4 m² |
| Inner tank lining | Stainless steel, inox 316L |
| Maximum heat exchanger pressure | 25 bar |
| Maximum test pressure | 15 bar |
| Maximum working pressure | 10 bar |
| Outer casing | Soft PVC |
| Tank capacity | 3000lt |
| Tank diameter | 1500 mm |
| Tank height | 1700 mm |
| Tank insulation | 100mm soft removable polyurethane |
| Heat exchangers | 1, removable, inox |
| Tank length | 2700 mm |
| Electric heating element | 4 kW, on request |
| Maximum operating temperature | 95 °C |
| Heating | |
| Net weight | 1065 kg |
Warranty & installation
We are here after you buy.
7 yearsmanufacturer's warranty
According to the manufacturer's instructions, the warranty requires installation as shown in the diagrams, water within drinking water limits and regular checks of the anode. The magnesium anode is a consumable and is not covered.
Warranty form (PDF, in Greek) →By a partner in your area
A partner installer does the site visit, the connection and the first start-up. Ask for a quote together with the product.
Contact us →Sure about the size?
Our engineers calculate your home's heat loss and confirm the choice. The first assessment is free.
Contact us →Before installing
- RoomIn a closed room protected from frost, with a floor drain for any leaks, as the manufacturer's instructions require.
- DimensionsDimensions: length 2700 mm, height 1700 mm, diameter with insulation 1500 mm.
- WeightTank weight 1065 kg. Allow for the water it will hold when you choose where it goes.
- Pressure and safetyMaximum heat exchanger pressure 25 bar. A safety valve is mandatory, according to the manufacturer's instructions. The maximum working pressure of each size is in the comparison.
- WaterThe mains water must be within drinking water limits; otherwise, according to the manufacturer, the cylinder is no longer under warranty.
- ServiceThe magnesium anode is checked at least twice a year and replaced when it is used up. In suitable water it lasts about 2 years, but it may need replacing after 6 months. Cleaning is done through the flange, without chemicals.
Questions
Ask us before you buy.
Our technicians answer every question, from choosing to installing.
2610 334 389 info@climaventis.grWhat does "double energy" mean?
That the water is heated in two ways: by the heat exchanger, connected for example to the boiler, and by a 4 kW electric heating element, fitted on request. If you also want to connect solar collectors, you need a triple-energy cylinder with two heat exchangers.
Is the electric heating element included?
The 4 kW electric heating element is optional and fitted on request. You will find it in the product options.
Will it fit in my room?
The comparison shows the dimensions of each size.
Which size do I need?
It depends on how much hot water you use and on the heat source. The comparison also shows the heat exchanger surface of each size. Call us and we will work it out together.
What servicing does it need?
The magnesium anode is checked at least twice a year and replaced when it is used up. In suitable water it lasts about 2 years, but it may need replacing after 6 months. Cleaning is done through the flange, without chemicals.
What warranty does it have?
7 years, according to the manufacturer. It requires installation following the manufacturer's instructions, water within drinking water limits and regular checks of the magnesium anode, which is a consumable and is not covered.
How is it delivered?
Collect it from our shop in Patras, or we send it by carrier. The shipping cost shows in the cart; if it does not show for your area or size, call us for the delivery cost. A plumber installs it; we can suggest a partner in your area.
Related products
See also
Mastersol
Horizontal stainless steel hot water cylinder 1,500 litres, double energy (1 removable stainless steel heat exchanger)
Fits your power need
5,030.93 €
Mastersol
Horizontal stainless steel hot water cylinder 2,000 litres, double energy (1 removable stainless steel heat exchanger)
Fits your power need
6,322.20 €
Mastersol
Horizontal stainless steel hot water cylinder 5,000 litres, double energy (1 removable stainless steel heat exchanger)
Fits your power need
14,203.98 €
Mastersol
Horizontal stainless steel hot water cylinder 7,000 litres, double energy (1 removable stainless steel heat exchanger)
Fits your power need
15,327.55 €
