.png){kind=small}
Inside
A cutaway from the manufacturer's drawings: it shows the inner hot water tank inside the buffer.
1 / 3
Tank in Tank
Tank in Tank 1,000 litresCode: Tit0-1000
From 500 to 2,000 litres, working pressure up to 6 bar.
Mastersol Tit0 models
- Delivery across GreeceBy freight because of its weight (185 kg). The cost is shown at checkout, once you enter an address.
- Pick-up in Patras171 Ag. Ioanni Pratsika St · Mon–Fri 08:30–17:00, Sat 09:00–14:00
- Installation by a partnerPartner installers across Greece.
- 7 years warranty from ClimaventisSpare parts and service directly from us.
Installer or retailer? Log in for trade prices
Description
Heating and hot water in one tank.
Buffer tank with a built-in inner hot water tank (tank in tank): the heating tank warms the inner, enamelled tank, from which you draw hot water.
Inner protectionEnamelled inner hot water tank · uncoated buffer
Insulation100 mm removable soft polyurethane
Pressure and temperatureup to 6 bar, up to 95 °C
7-year warrantyWith the Mastersol warranty form.
Highlights
A closer look.
From the manufacturer's drawings.
Connections and dimensions
The manufacturer's drawing with the connection points. The dimensions of each size are in the comparison and the specifications.
Compare the models
The sizes.
5 sizes, from 500 to 2,000 litres.
| Compare the models | Tit0-5001,094.68 € | Tit0-7501,174.86 € | Tit0-10001,267.25 €This model | Tit0-15002,187.62 € | Tit0-20002,398.54 € |
|---|---|---|---|---|---|
| Tank capacity | 500lt | 750lt | 1000lt | 1500lt | 2000lt |
| Actual volume | 315lt | 570lt | 691lt | 1452lt | 1732lt |
| Inner hot water tank | 160lt | 170lt | 170lt | 170lt | 170lt |
| Heat exchangers | None | None | None | None | None |
| Tank height | 1842 mm | 1914 mm | 2164 mm | 2228 mm | 2247 mm |
| Tank diameter | 840 mm | 1000 mm | 1000 mm | 1300 mm | 1400 mm |
| Diameter without insulation | 640 mm | 800 mm | 800 mm | 1100 mm | 1200 mm |
| Required height | 1988 mm | 2124 mm | 2348 mm | 2545 mm | 2614 mm |
| Net weight | 142 kg | 164 kg | 185 kg | 313 kg | 348 kg |
| Maximum working pressure | 6 bar | 6 bar | 6 bar | 6 bar | 6 bar |
| Maximum test pressure | 8 bar | 8 bar | 8 bar | 8 bar | 8 bar |
| Maximum operating temperature | 95 °C | 95 °C | 95 °C | 95 °C | 95 °C |
Manufacturer's data, which may vary slightly. The diameter includes the insulation. "From" prices include VAT.
Technical specifications
All the numbers, in one table.
| Tank | |
|---|---|
| Tank capacity | 1000lt |
| Actual volume | 691lt |
| Tank height | 2164 mm |
| Tank diameter | 1000 mm |
| Diameter without insulation | 800 mm |
| Required height | 2348 mm |
| Net weight | 185 kg |
| Tank steel | Hot-rolled steel sheet S235JR (EN 10025) |
| Inner tank lining | Enamelled inner hot water tank · uncoated buffer |
| Tank insulation | 100 mm removable soft polyurethane |
| Outer casing | Leatherette or metal jacket |
| Maximum working pressure | 6 bar |
| Maximum test pressure | 8 bar |
| Maximum operating temperature | 95 °C |
| Electric heating element | On request |
| Hydraulic connections | Tank 1 1/2″ · domestic water 1″ |
| Inner hot water tank | 170lt |
| Heat exchangers | |
| Heat exchangers | None |
| Warranty | |
| Warranty | 7 years |
Warranty & installation
We are here after you buy.
7 yearsmanufacturer's warranty
The warranty requires installation following the instructions, water within drinking water limits and regular checks of the anode, where there is one. The anode is a consumable.
Warranty form (PDF, in Greek) →By a partner in your area
A partner installer does the site visit, the connection and the first start-up. Ask for a quote together with the product.
Contact us →Sure about the size?
Our engineers calculate your home's heat loss and confirm the choice. The first assessment is free.
Contact us →Before installing
- RoomIn a closed room protected from frost, with a floor drain for any leaks.
- DimensionsDimensions: height 2164 mm, diameter with insulation 1000 mm. To stand it up you need a room height of at least 2348 mm (its diagonal).
- WeightWeight 185 kg, without water. Allow for the water it will hold when you choose where it goes.
- SafetyThe domestic hot water side always needs an expansion vessel, a safety valve and anode protection, as the manufacturer requires.
Questions
Ask us before you buy.
Our technicians answer every question, from choosing to installing.
2610 334 389 info@climaventis.grIs an electric heating element included?
No; the electric heating element is fitted on request. Ask us with your order if you want one.
Which size do I need?
It depends on your use and on the heat source. The comparison shows the data of each size; call us and we will work it out together.
What warranty does it have?
7 years, with the Mastersol warranty form you will find below.
How is it delivered?
Collect it from our shop in Patras, or we send it by carrier. If the cart does not show a shipping cost for your area or size, call us. A plumber installs it; we can suggest a partner in your area.
Complete the installation
The heat source: a Werstahl boiler.
Werstahl Hercules HS biomass boilers come from the same company.
-250x250.png)
Werstahl
Werstahl Hercules HS40 (40,000 kcal - 47 kW) Multi-fuel biomass boiler (olive pits, pellets, wood, coal)
Efficiency 85% · for spaces up to 220 m²Wood pelletsOlive pitsKernelsMaize+6
Fits your power need
1,770.00 €
Options
Werstahl
Werstahl Hercules HS50 (50,000 kcal - 58 kW) Multi-fuel biomass boiler (olive pits, pellets, wood, coal)
Efficiency 85% · for spaces up to 280 m²Wood pelletsOlive pitsKernelsMaize+6
Fits your power need
1,940.00 €
Options
Related products
