.png){kind=small}
Coil for the heat pump
The coil runs along about 80% of the tank and has a large cross-section. It works well even with a flow of about 55°C, for quick hot water recovery and better stratification. Ideal for hybrid sun and heat pump systems.
1 / 8
Solar water heater for heat pumps
Mastersol HP Solar Water Heater for Heat Pumps 200 lt, Selective Collectors 3.0 m²Code: HP-200-3
A tank with a very long coil, along about 80% of its length, for connection to a heat pump. Hot water from the sun, the heat pump and the electric element.
Mastersol HP150–200 models
- Delivery across GreeceBy courier or freight, depending on size. The cost is shown at checkout, once you enter an address.
- Pick-up in Patras171 Ag. Ioanni Pratsika St · Mon–Fri 08:30–17:00, Sat 09:00–14:00
- Installation by a partnerPartner installers across Greece.
- 5 years cylinder (10 with the extension kit), 15 years collectors warranty from ClimaventisSpare parts and service directly from us.
Installer or retailer? Log in for trade prices
Description
Sun and heat pump, in one cylinder.
The Mastersol HP is a closed-circuit solar water heater designed to connect to a heat pump. Inside the tank is a very long coil heat exchanger, along about 80% of the tank, that works well even with a flow temperature of about 55°C. The water heats up quickly, with good stratification and fewer heat pump cycles.
The coil is made of 2mm DC tube, enamelled to DIN 4753-3, with a large cross-section, which the heat pump needs to run properly. Because tank and exchanger are built as one, there is less of the electrolysis that add-on exchangers of other materials cause, and the flange stays free for servicing and replacing the anode.
The tank has Bayer Duro Glass enamel fired at 850°C, a magnesium anode, a jacket for the solar closed circuit, which withstands −47°C, and a 3.5kw electric element. The collector has a full-plate selective aluminium-titanium absorber, copper risers and 3.2mm tempered safety glass that stands up to hail and heavy rain.
This range covers the 150 and 200-litre models, with 2 to 4 m² of collectors. For larger needs there are the 300-litre HP models.
Mastersol solar water heaters carry an A+ energy label and are CE and Solar Keymark certified.
XL coilAlong about 80% of the tank.
55°C flowWorks well with low heat pump temperatures.
Fewer cyclesQuick recovery, lower consumption.
Built as oneLess electrolysis, a free flange.
Selective collectorFull-plate aluminium-titanium absorber, copper risers.
3.5kw elementA third source, on electricity.
Highlights
What makes the difference.
What every HP comes with, from the coil to the collector.
Closed-circuit jacket
Around the tank, the jacket of the solar circuit is filled with antifreeze, for frost resistance down to −47°C. 2.5mm European steel, Bayer Duro Glass enamel fired at 850°C and 5cm of rigid polyurethane insulation.
Full-plate absorber
A 0.40mm selective aluminium-titanium sheet across the whole collector, on Ø22 & Ø8 copper risers. 3.2mm tempered safety glass that stands up to hail and heavy rain.
One-piece aluminium frame
A one-piece aluminium frame with a 1.25mm profile, a 0.5mm galvanised steel back and double 4cm mineral wool insulation. 100% neutral silicone.
Closed circuit with antifreeze
The collector and the jacket are filled with antifreeze, so the system withstands frost down to −47°C. On top of the tank are the fill and vent points of the circuit and the seat of its safety valve (1.5-3 bar).
Galvanised frame
The mounting frame is made of 2mm seamless galvanised steel, in a flat-roof (18kg) or a tiled-roof (20kg) version. You choose it when you order.
Compare the models
Six sizes, one build.
All models have a heat pump coil, selective collectors and a 3.5kw element. The litres and the collector area change.
| Compare the models | HP-150-2926.02 € | HP-150-25979.44 € | HP-150-31,068.48 € | HP-200-271,069.59 € | HP-200-31,128.58 €This model | HP-200-41,212.06 € |
|---|---|---|---|---|---|---|
| Tank · collectors | 150 lt · 2.0 m² | 150 lt · 2.5 m² | 150 lt · 3.0 m² | 200 lt · 2.75 m² | 200 lt · 3.0 m² | 200 lt · 4.0 m² |
| Collector dimensions | 1 collector, 2.0 × 1.0 m | 1 collector, 2.0 × 1.25 m | 2 collectors, 1.5 × 1.0 m | 1 collector | 2 collectors, 1.5 × 1.0 m · total width 2.12 m | 2 collectors, 2.0 × 1.0 m · total width 2.12 m |
| Tank length | 128cm | 128cm | 128cm | 128cm | 128cm | 128cm |
| Tank diameter | 50cm | 50cm | 50cm | 58cm | 58cm | 58cm |
| Jacket capacity | 8 lt | 8 lt | 8 lt | 9 lt | 9 lt | 9 lt |
| Tank weight | 55kg | 55kg | 55kg | 68kg | 68kg | 68kg |
| Collector weight | 34.3kg | 41kg | 2 × 26kg | – | 2 × 26kg | 2 × 34.3kg |
Manufacturer's data (mastersol.gr). Collector dimensions: height × width. "From" prices include VAT.
Technical specifications
All the numbers, in one table.
| Litres | |
|---|---|
| 200 lt (4-5 users) | |
| Solar Water Heaters | |
| Collector area | 3.0 m² |
| Collector back | 0.5mm galvanised steel sheet |
| Collector dimensions | 2 collectors, 1.5 × 1.0 m · total width 2.12 m |
| Collector efficiency | 95% ±2% |
| Collector frame | Aluminium, one-piece |
| Collector insulation | Double mineral wool 4cm |
| Collector type | Selective aluminium-titanium, full plate |
| Energy Class | A+ |
| Inner tank lining | Duro Glass enamel (Bayer) to DIN 4753-3, fired at 850°C |
| Maximum heat exchanger pressure | 3.2bar |
| Maximum test pressure | 15bar |
| Maximum working pressure | 10bar |
| Outer casing | Pre-painted galvanised steel sheet 0.5mm |
| Riser grid | Copper Ø22 & Ø8 |
| Tank capacity | 200lt |
| Tank connections | Heavy-duty brass |
| Tank diameter | 58cm |
| Tank insulation | Rigid polyurethane 5cm, 48kg/m³, self-extinguishing |
| Tank steel | 2.5mm European steel 1204 V.E., MAG welded |
| Tank type | Closed circuit with heat-exchange jacket |
| Tank · collectors | 200 lt · 3.0 m² |
| Energy sources | Sun, heat pump and electricity |
| Tank length | 128cm |
| Jacket capacity | 9 lt |
| Tank weight | 68kg |
| Electric heating element | 3.5kw (Ø140 flange, 8 holes) |
| Maximum operating temperature | 95°C |
| Heat pump coil | Coil of 2mm DC tube, enamelled (DIN 4753-3), along about 80% of the tank |
| Collector glass | 3.2mm tempered safety glass |
| Collector weight | 2 × 26kg |
| Mounting frame | 2mm seamless galvanised steel · 18kg (flat roof) or 20kg (tiled roof) |
| Heating | |
| Warranty | 5 years cylinder (10 with the extension kit), 15 years collectors |
Warranty & installation
We are here after you buy.
5 yearson the cylinder, serviced every 2 years
10 yearson the cylinder, with the extension kit and a yearly service
15 yearson the solar collectors
1 yearon the electrical parts
The extension kit is an overheat valve (94°C / 6 bar), a 10 bar closed expansion vessel and an expansion vessel for the closed circuit. The warranty covers parts, not labour or transport, and does not cover the collector glass.
The system must be installed by a licensed plumber. The warranty form is filled in, signed and emailed to Mastersol (info@mastersol.gr), together with proof of each service.
Warranty terms → Warranty form (PDF, in Greek) →By a partner in your area
A partner installer does the site visit, the connection and the first start-up. Ask for a quote together with the product.
Contact us →Sure about the size?
Our engineers calculate your home's heat loss and confirm the choice. The first assessment is free.
Contact us →Before installing
- FrameMade of 2mm seamless galvanised steel, for a flat roof (18kg) or a tiled roof (20kg). You choose it in the product options.
- DimensionsTank: length 128cm, diameter 58cm. The collectors of each model are in the model comparison.
- PlumbingHeavy-duty brass connections. Maximum working pressure: tank 10bar, jacket 3.2bar; maximum temperature 95°C. You choose the assembly materials, with polyethylene or stainless steel pipe, when you order. The coil connects to the heat pump and works well even with a flow temperature of about 55°C.
- ElectricsElectric element 3.5kw (Ø140 flange, 8 holes). Electrical parts have a 1-year warranty.
- InstallationBy a licensed plumber, with a service receipt. It is a condition of the warranty.
- ServicingEvery 2 years, replace the magnesium anode rod and the safety valves; every year for the 10-year warranty. Every year, check and top up the antifreeze. The flange stays free for servicing.
- SummerMastersol recommends covering half of the collector area in summer, and all of it when you are away for more than 3 days.
Questions
Ask us before you buy.
Our technicians answer every question, from choosing to installing.
2610 334 389 info@climaventis.grWhich size do I need?
Mastersol sizes its systems for a normal use of 40 litres of hot water at 40°C per person. As a guide: 1 person, 100 litres with 1.5 m² anywhere in Greece. 2 people, 120 litres with 2.0 m² (1.5 m² is enough in southern Greece). 3 people, 120 litres with 2.0 m², or 160 litres with 2.0 m² in northern Greece. 4 people, 160 litres with 2.5 m² (2.0 m² in the south). 5 people, 200 litres with 3 m², or 4 m² in northern Greece. If you are not sure, call us. The HP models come in 150, 200 and 300 litres.
Which heat pump does it work with?
The HP is designed to connect to a heat pump, and its coil works well even with a flow of about 55°C. For your particular heat pump, ask us before you order.
Why a built-in coil instead of an add-on exchanger?
Because tank and coil are built as one, with a uniform surface. Add-on exchangers of different materials (copper or stainless steel) wear the anode out quickly through electrolysis and shorten the life of the tank. The flange also stays free for servicing and replacing the anode.
Does it withstand frost?
Yes. It runs on a closed circuit with antifreeze and withstands temperatures down to −47°C. The antifreeze is checked and topped up every year, depending on the area.
Can it go on a flat roof and on a tiled roof?
Yes. The mounting frame is made of 2mm seamless galvanised steel, in a flat-roof (18kg) or a tiled-roof (20kg) version. You choose it in the product options.
What warranty does it have?
5 years on the cylinder, serviced every 2 years. 10 years if you also fit an overheat valve (94°C / 6 bar), a 10 bar closed expansion vessel and a closed-circuit expansion vessel, with a yearly service. 15 years on the collectors and 1 year on the electrical parts. The warranty covers parts, not labour or transport.
What servicing does it need?
Every 2 years the magnesium anode rod and the safety valves are replaced, or every year for the 10-year warranty. Every year the antifreeze is checked and topped up. The technician signs the warranty form and gives you a service receipt.
How are delivery and installation done?
The solar water heater ships by carrier throughout Greece; you see the shipping options and cost in the cart. A licensed plumber installs it, which is also a condition of the warranty; we can suggest a partner in your area.
Complete the installation
For the 10-year warranty.
The cylinder warranty becomes 10 years with an overheat valve (94°C / 6 bar), a 10 bar closed expansion vessel and an expansion vessel for the closed circuit, plus a yearly service. Here is the Mastersol closed-circuit expansion vessel.
Mastersol
Mastersol FS1 expansion vessel for a solar closed circuit - 1 litre
Fits your power need
23.73 €
Related products
See also
Mastersol
Mastersol HP Solar Water Heater for Heat Pumps 150 lt, Selective Collector 2.5 m²
Fits your power need
979.44 €
Mastersol
Mastersol HP Solar Water Heater for Heat Pumps 150 lt, Selective Collector 2.0 m²
Fits your power need
926.02 €
Mastersol
Mastersol HP Solar Water Heater for Heat Pumps 150 lt, Selective Collectors 3.0 m²
Fits your power need
1,068.48 €
Mastersol
Mastersol HP Solar Water Heater for Heat Pumps 200 lt, Selective Collector 2.75 m²
Fits your power need
1,069.59 €
